105 So.
406-962-3573
Poles
Buggy poles come in
several sizes and bends, similar to shafts.
These poles are made from straight grained hickory for best strength and
flexibility. We carry most styles in
pony, regular horse, and draft horse sizes.
Single
bend poles are used most commonly on run-a-bouts and similar
light vehicles. These come with extra
long ends to allow plenty of room to fit the pole circle and irons.
|
SIZE |
PRICE |
|
Pony Regular Draft |
$44.00 $47.00 $54.00 |

Double bend
poles are used more on spring wagons and similar vehicles where the box sets on
top of the front axle spring, or slightly ahead. The pole circle is most often attached in the
lower bend which allows for a little flexibility to adjust the angle of the
circle. The heels are extra long to
allow for trimming.
|
SIZE |
PRICE |
|
Pony Regular Draft |
$48.00 $51.00 $57.00 |
Wagon and mower tongues are not pictured here, because
there’s not much to put in a picture.
Both sizes are made out of ash for strength and flexibility. Many times I am asked why tongues are not
made out of oak, and much of it is availability in these larger sizes. When you look at testing done by the
|
Wagon tongues are roughly 4 x 4 x 13’ Mower tongues are roughly 4 ½ x 4 x
14’ |
$80.00 $84.00 |
We also have straight
carriage poles for wagonettes, hearses, Vis-à-vis, and similar vehicles.
|
2 x 3 x 138” straight poles are $67.00 |
Pole
circles fit to the back of buggy poles and allow the irons of the pole to
attach to the front axle of the vehicle.
These are already mortised and are extra long to allow for trimming and
fitting. These are also made out of
hickory.
|
SIZE |
PRICE |
|
Pony Regular Draft |
$14.75 $14.95 $15.95 |

We carry pole tips in
three sizes. The (a) tip is a zinc alloy
and the largest tip we have. It measures
1 5/8 ID. The (b) tip is also zinc alloy
and measures 1 3/8 ID. The (c) tip is an
original style cast iron pole tip and measures 1 1/4 ID.
|
SIZE |
PRICE |
|
a b c |
$14.00 $12.00 $8.75 |
Our wagon tongue ends are adaptable to tongues with 2 ¼” ends. They are predrilled for two rivets or bolts.
|
Wagon tongue ends $13.50 |

Montana Mower Tongues
|
MT Buggy Pole Parts
|
Montana Single Bend Pole
|
MT Double Bend Pole
|
Montana Pole Parts
|
MT Buggy Pole Parts
Dave and Diane Engel
ENGELS COACH SHOP
105 So. Main
406-962-3573
(Top) (Home)
(History) (Photos) (Catalog) (Wheels) (FAQS) (Videos)
(Contact us)
Copyright 2003-2010 Dave Engel All rights reserved